Quick view Details sku: G080-048 MINI 8/10mm Bike Fork-Shock Shaft Clamp/Vise block-Suspension Rod Holder For Fox MSRP: Now: $22.78 Add to Cart Compare Quick view Details sku: G080-022 Isostrut Tool for Shock Negative Plate - Trek Service/Rebuild, for FOX ISO Strut MSRP: Now: $11.78 Add to Cart Compare Quick view Details sku: G080-017 2025 Pinned Socket for Damper Cartridge for FOX GRIP SL¨CFor Servicing/Rebuilding MSRP: Now: $10.78 Add to Cart Compare Quick view Details sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set MSRP: Now: $141.78 Add to Cart Compare Quick view Details sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 MSRP: Now: $65.78 Add to Cart Compare SALE Quick view Details sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view Details sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 MSRP: Now: $103.78 Add to Cart Compare Quick view Details sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 MSRP: Now: $13.78 Add to Cart Compare Quick view Details sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox MSRP: Now: $17.78 Add to Cart Compare Quick view Details sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-048 MINI 8/10mm Bike Fork-Shock Shaft Clamp/Vise block-Suspension Rod Holder For Fox This tool is for a 6061 aluminum CNC machined wrench for 34mm stanchion DVO forks. This is a 2-sided wrench used to remove the caps at the bottom of the sanctions. One end has the thinner longer notches and the other has the smaller wider notches. These... MSRP: Now: $22.78 Add to Cart Compare Quick view sku: G080-022 Isostrut Tool for Shock Negative Plate - Trek Service/Rebuild, for FOX ISO Strut This tool is CNC machined to a tight tolerance using 6061 aluminum purchased. This fits the FOX isostrut found on trek bikes 2020-2023. This tool is used to remove the isostruts negative plate. This is needed for a rebuild or shock service. Only the... MSRP: Now: $11.78 Add to Cart Compare Quick view sku: G080-017 2025 Pinned Socket for Damper Cartridge for FOX GRIP SL¨CFor Servicing/Rebuilding The pinned socket is used on the grip SL only. It features hardened steel pins and a 3/8" drive. MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set This auction is a 3 piece set for the trek fox isostrut 2020-2023.1st we have a Trunnion adaptor for the trek FOX isostut 2020-2023 . This clamps around the isostrut and holds the tabs so you can use it in a vise or some a hand dyno under preasure. This... MSRP: Now: $141.78 Add to Cart Compare Quick view sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 This auction is for a 3 piece tool kit for servicing the 2025 fox grip SL damper. These are all the specialty tools you need beyond what you needed for the grip2. All are CNC machined from billet 6061 aluminum to a precision tolerance.The clamp only... MSRP: Now: $65.78 Add to Cart Compare SALE Quick view sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 This auction is for a 5 piece tool kit for the fox 36/38/40 with Grip/Grip2 damper.The kit includes a CNC machined shock clamp for the 2017-2022 FOX GRIP damper and 2019-2024 GRIP2 damper for fox 32/34/36/38 and 40 models. . The clamp fits the body ,and... MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 Up for auction is a 4 piece tool set made to service/rebuild the Fox transfer SL and the Raceface Turbine SL dropper seat posts. 2 tools fit the 30.9 and 31.6mm only. The other 2 tools fit 30.9, 31.6 and 27.2. Please read the description further. These... MSRP: Now: $103.78 Add to Cart Compare Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Quick view Details sku: G080-022 Isostrut Tool for Shock Negative Plate - Trek Service/Rebuild, for FOX ISO Strut MSRP: Now: $11.78 Add to Cart Compare Quick view Details sku: G080-017 2025 Pinned Socket for Damper Cartridge for FOX GRIP SL¨CFor Servicing/Rebuilding MSRP: Now: $10.78 Add to Cart Compare Quick view Details sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set MSRP: Now: $141.78 Add to Cart Compare Quick view Details sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 MSRP: Now: $65.78 Add to Cart Compare SALE Quick view Details sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view Details sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 MSRP: Now: $103.78 Add to Cart Compare Quick view Details sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 MSRP: Now: $13.78 Add to Cart Compare Quick view Details sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox MSRP: Now: $17.78 Add to Cart Compare Quick view Details sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-048 MINI 8/10mm Bike Fork-Shock Shaft Clamp/Vise block-Suspension Rod Holder For Fox This tool is for a 6061 aluminum CNC machined wrench for 34mm stanchion DVO forks. This is a 2-sided wrench used to remove the caps at the bottom of the sanctions. One end has the thinner longer notches and the other has the smaller wider notches. These... MSRP: Now: $22.78 Add to Cart Compare Quick view sku: G080-022 Isostrut Tool for Shock Negative Plate - Trek Service/Rebuild, for FOX ISO Strut This tool is CNC machined to a tight tolerance using 6061 aluminum purchased. This fits the FOX isostrut found on trek bikes 2020-2023. This tool is used to remove the isostruts negative plate. This is needed for a rebuild or shock service. Only the... MSRP: Now: $11.78 Add to Cart Compare Quick view sku: G080-017 2025 Pinned Socket for Damper Cartridge for FOX GRIP SL¨CFor Servicing/Rebuilding The pinned socket is used on the grip SL only. It features hardened steel pins and a 3/8" drive. MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set This auction is a 3 piece set for the trek fox isostrut 2020-2023.1st we have a Trunnion adaptor for the trek FOX isostut 2020-2023 . This clamps around the isostrut and holds the tabs so you can use it in a vise or some a hand dyno under preasure. This... MSRP: Now: $141.78 Add to Cart Compare Quick view sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 This auction is for a 3 piece tool kit for servicing the 2025 fox grip SL damper. These are all the specialty tools you need beyond what you needed for the grip2. All are CNC machined from billet 6061 aluminum to a precision tolerance.The clamp only... MSRP: Now: $65.78 Add to Cart Compare SALE Quick view sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 This auction is for a 5 piece tool kit for the fox 36/38/40 with Grip/Grip2 damper.The kit includes a CNC machined shock clamp for the 2017-2022 FOX GRIP damper and 2019-2024 GRIP2 damper for fox 32/34/36/38 and 40 models. . The clamp fits the body ,and... MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 Up for auction is a 4 piece tool set made to service/rebuild the Fox transfer SL and the Raceface Turbine SL dropper seat posts. 2 tools fit the 30.9 and 31.6mm only. The other 2 tools fit 30.9, 31.6 and 27.2. Please read the description further. These... MSRP: Now: $103.78 Add to Cart Compare Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Quick view Details sku: G080-017 2025 Pinned Socket for Damper Cartridge for FOX GRIP SL¨CFor Servicing/Rebuilding MSRP: Now: $10.78 Add to Cart Compare Quick view Details sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set MSRP: Now: $141.78 Add to Cart Compare Quick view Details sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 MSRP: Now: $65.78 Add to Cart Compare SALE Quick view Details sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view Details sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 MSRP: Now: $103.78 Add to Cart Compare Quick view Details sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 MSRP: Now: $13.78 Add to Cart Compare Quick view Details sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox MSRP: Now: $17.78 Add to Cart Compare Quick view Details sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-048 MINI 8/10mm Bike Fork-Shock Shaft Clamp/Vise block-Suspension Rod Holder For Fox This tool is for a 6061 aluminum CNC machined wrench for 34mm stanchion DVO forks. This is a 2-sided wrench used to remove the caps at the bottom of the sanctions. One end has the thinner longer notches and the other has the smaller wider notches. These... MSRP: Now: $22.78 Add to Cart Compare Quick view sku: G080-022 Isostrut Tool for Shock Negative Plate - Trek Service/Rebuild, for FOX ISO Strut This tool is CNC machined to a tight tolerance using 6061 aluminum purchased. This fits the FOX isostrut found on trek bikes 2020-2023. This tool is used to remove the isostruts negative plate. This is needed for a rebuild or shock service. Only the... MSRP: Now: $11.78 Add to Cart Compare Quick view sku: G080-017 2025 Pinned Socket for Damper Cartridge for FOX GRIP SL¨CFor Servicing/Rebuilding The pinned socket is used on the grip SL only. It features hardened steel pins and a 3/8" drive. MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set This auction is a 3 piece set for the trek fox isostrut 2020-2023.1st we have a Trunnion adaptor for the trek FOX isostut 2020-2023 . This clamps around the isostrut and holds the tabs so you can use it in a vise or some a hand dyno under preasure. This... MSRP: Now: $141.78 Add to Cart Compare Quick view sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 This auction is for a 3 piece tool kit for servicing the 2025 fox grip SL damper. These are all the specialty tools you need beyond what you needed for the grip2. All are CNC machined from billet 6061 aluminum to a precision tolerance.The clamp only... MSRP: Now: $65.78 Add to Cart Compare SALE Quick view sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 This auction is for a 5 piece tool kit for the fox 36/38/40 with Grip/Grip2 damper.The kit includes a CNC machined shock clamp for the 2017-2022 FOX GRIP damper and 2019-2024 GRIP2 damper for fox 32/34/36/38 and 40 models. . The clamp fits the body ,and... MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 Up for auction is a 4 piece tool set made to service/rebuild the Fox transfer SL and the Raceface Turbine SL dropper seat posts. 2 tools fit the 30.9 and 31.6mm only. The other 2 tools fit 30.9, 31.6 and 27.2. Please read the description further. These... MSRP: Now: $103.78 Add to Cart Compare Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Quick view Details sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set MSRP: Now: $141.78 Add to Cart Compare Quick view Details sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 MSRP: Now: $65.78 Add to Cart Compare SALE Quick view Details sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view Details sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 MSRP: Now: $103.78 Add to Cart Compare Quick view Details sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 MSRP: Now: $13.78 Add to Cart Compare Quick view Details sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox MSRP: Now: $17.78 Add to Cart Compare Quick view Details sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-048 MINI 8/10mm Bike Fork-Shock Shaft Clamp/Vise block-Suspension Rod Holder For Fox This tool is for a 6061 aluminum CNC machined wrench for 34mm stanchion DVO forks. This is a 2-sided wrench used to remove the caps at the bottom of the sanctions. One end has the thinner longer notches and the other has the smaller wider notches. These... MSRP: Now: $22.78 Add to Cart Compare Quick view sku: G080-022 Isostrut Tool for Shock Negative Plate - Trek Service/Rebuild, for FOX ISO Strut This tool is CNC machined to a tight tolerance using 6061 aluminum purchased. This fits the FOX isostrut found on trek bikes 2020-2023. This tool is used to remove the isostruts negative plate. This is needed for a rebuild or shock service. Only the... MSRP: Now: $11.78 Add to Cart Compare Quick view sku: G080-017 2025 Pinned Socket for Damper Cartridge for FOX GRIP SL¨CFor Servicing/Rebuilding The pinned socket is used on the grip SL only. It features hardened steel pins and a 3/8" drive. MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set This auction is a 3 piece set for the trek fox isostrut 2020-2023.1st we have a Trunnion adaptor for the trek FOX isostut 2020-2023 . This clamps around the isostrut and holds the tabs so you can use it in a vise or some a hand dyno under preasure. This... MSRP: Now: $141.78 Add to Cart Compare Quick view sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 This auction is for a 3 piece tool kit for servicing the 2025 fox grip SL damper. These are all the specialty tools you need beyond what you needed for the grip2. All are CNC machined from billet 6061 aluminum to a precision tolerance.The clamp only... MSRP: Now: $65.78 Add to Cart Compare SALE Quick view sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 This auction is for a 5 piece tool kit for the fox 36/38/40 with Grip/Grip2 damper.The kit includes a CNC machined shock clamp for the 2017-2022 FOX GRIP damper and 2019-2024 GRIP2 damper for fox 32/34/36/38 and 40 models. . The clamp fits the body ,and... MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 Up for auction is a 4 piece tool set made to service/rebuild the Fox transfer SL and the Raceface Turbine SL dropper seat posts. 2 tools fit the 30.9 and 31.6mm only. The other 2 tools fit 30.9, 31.6 and 27.2. Please read the description further. These... MSRP: Now: $103.78 Add to Cart Compare Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Quick view Details sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 MSRP: Now: $65.78 Add to Cart Compare SALE Quick view Details sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view Details sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 MSRP: Now: $103.78 Add to Cart Compare Quick view Details sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 MSRP: Now: $13.78 Add to Cart Compare Quick view Details sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox MSRP: Now: $17.78 Add to Cart Compare Quick view Details sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-048 MINI 8/10mm Bike Fork-Shock Shaft Clamp/Vise block-Suspension Rod Holder For Fox This tool is for a 6061 aluminum CNC machined wrench for 34mm stanchion DVO forks. This is a 2-sided wrench used to remove the caps at the bottom of the sanctions. One end has the thinner longer notches and the other has the smaller wider notches. These... MSRP: Now: $22.78 Add to Cart Compare Quick view sku: G080-022 Isostrut Tool for Shock Negative Plate - Trek Service/Rebuild, for FOX ISO Strut This tool is CNC machined to a tight tolerance using 6061 aluminum purchased. This fits the FOX isostrut found on trek bikes 2020-2023. This tool is used to remove the isostruts negative plate. This is needed for a rebuild or shock service. Only the... MSRP: Now: $11.78 Add to Cart Compare Quick view sku: G080-017 2025 Pinned Socket for Damper Cartridge for FOX GRIP SL¨CFor Servicing/Rebuilding The pinned socket is used on the grip SL only. It features hardened steel pins and a 3/8" drive. MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set This auction is a 3 piece set for the trek fox isostrut 2020-2023.1st we have a Trunnion adaptor for the trek FOX isostut 2020-2023 . This clamps around the isostrut and holds the tabs so you can use it in a vise or some a hand dyno under preasure. This... MSRP: Now: $141.78 Add to Cart Compare Quick view sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 This auction is for a 3 piece tool kit for servicing the 2025 fox grip SL damper. These are all the specialty tools you need beyond what you needed for the grip2. All are CNC machined from billet 6061 aluminum to a precision tolerance.The clamp only... MSRP: Now: $65.78 Add to Cart Compare SALE Quick view sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 This auction is for a 5 piece tool kit for the fox 36/38/40 with Grip/Grip2 damper.The kit includes a CNC machined shock clamp for the 2017-2022 FOX GRIP damper and 2019-2024 GRIP2 damper for fox 32/34/36/38 and 40 models. . The clamp fits the body ,and... MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 Up for auction is a 4 piece tool set made to service/rebuild the Fox transfer SL and the Raceface Turbine SL dropper seat posts. 2 tools fit the 30.9 and 31.6mm only. The other 2 tools fit 30.9, 31.6 and 27.2. Please read the description further. These... MSRP: Now: $103.78 Add to Cart Compare Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
SALE Quick view Details sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare
Quick view Details sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 MSRP: Now: $103.78 Add to Cart Compare Quick view Details sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 MSRP: Now: $13.78 Add to Cart Compare Quick view Details sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox MSRP: Now: $17.78 Add to Cart Compare Quick view Details sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-048 MINI 8/10mm Bike Fork-Shock Shaft Clamp/Vise block-Suspension Rod Holder For Fox This tool is for a 6061 aluminum CNC machined wrench for 34mm stanchion DVO forks. This is a 2-sided wrench used to remove the caps at the bottom of the sanctions. One end has the thinner longer notches and the other has the smaller wider notches. These... MSRP: Now: $22.78 Add to Cart Compare Quick view sku: G080-022 Isostrut Tool for Shock Negative Plate - Trek Service/Rebuild, for FOX ISO Strut This tool is CNC machined to a tight tolerance using 6061 aluminum purchased. This fits the FOX isostrut found on trek bikes 2020-2023. This tool is used to remove the isostruts negative plate. This is needed for a rebuild or shock service. Only the... MSRP: Now: $11.78 Add to Cart Compare Quick view sku: G080-017 2025 Pinned Socket for Damper Cartridge for FOX GRIP SL¨CFor Servicing/Rebuilding The pinned socket is used on the grip SL only. It features hardened steel pins and a 3/8" drive. MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set This auction is a 3 piece set for the trek fox isostrut 2020-2023.1st we have a Trunnion adaptor for the trek FOX isostut 2020-2023 . This clamps around the isostrut and holds the tabs so you can use it in a vise or some a hand dyno under preasure. This... MSRP: Now: $141.78 Add to Cart Compare Quick view sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 This auction is for a 3 piece tool kit for servicing the 2025 fox grip SL damper. These are all the specialty tools you need beyond what you needed for the grip2. All are CNC machined from billet 6061 aluminum to a precision tolerance.The clamp only... MSRP: Now: $65.78 Add to Cart Compare SALE Quick view sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 This auction is for a 5 piece tool kit for the fox 36/38/40 with Grip/Grip2 damper.The kit includes a CNC machined shock clamp for the 2017-2022 FOX GRIP damper and 2019-2024 GRIP2 damper for fox 32/34/36/38 and 40 models. . The clamp fits the body ,and... MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 Up for auction is a 4 piece tool set made to service/rebuild the Fox transfer SL and the Raceface Turbine SL dropper seat posts. 2 tools fit the 30.9 and 31.6mm only. The other 2 tools fit 30.9, 31.6 and 27.2. Please read the description further. These... MSRP: Now: $103.78 Add to Cart Compare Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Quick view Details sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 MSRP: Now: $13.78 Add to Cart Compare Quick view Details sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox MSRP: Now: $17.78 Add to Cart Compare Quick view Details sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-048 MINI 8/10mm Bike Fork-Shock Shaft Clamp/Vise block-Suspension Rod Holder For Fox This tool is for a 6061 aluminum CNC machined wrench for 34mm stanchion DVO forks. This is a 2-sided wrench used to remove the caps at the bottom of the sanctions. One end has the thinner longer notches and the other has the smaller wider notches. These... MSRP: Now: $22.78 Add to Cart Compare Quick view sku: G080-022 Isostrut Tool for Shock Negative Plate - Trek Service/Rebuild, for FOX ISO Strut This tool is CNC machined to a tight tolerance using 6061 aluminum purchased. This fits the FOX isostrut found on trek bikes 2020-2023. This tool is used to remove the isostruts negative plate. This is needed for a rebuild or shock service. Only the... MSRP: Now: $11.78 Add to Cart Compare Quick view sku: G080-017 2025 Pinned Socket for Damper Cartridge for FOX GRIP SL¨CFor Servicing/Rebuilding The pinned socket is used on the grip SL only. It features hardened steel pins and a 3/8" drive. MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set This auction is a 3 piece set for the trek fox isostrut 2020-2023.1st we have a Trunnion adaptor for the trek FOX isostut 2020-2023 . This clamps around the isostrut and holds the tabs so you can use it in a vise or some a hand dyno under preasure. This... MSRP: Now: $141.78 Add to Cart Compare Quick view sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 This auction is for a 3 piece tool kit for servicing the 2025 fox grip SL damper. These are all the specialty tools you need beyond what you needed for the grip2. All are CNC machined from billet 6061 aluminum to a precision tolerance.The clamp only... MSRP: Now: $65.78 Add to Cart Compare SALE Quick view sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 This auction is for a 5 piece tool kit for the fox 36/38/40 with Grip/Grip2 damper.The kit includes a CNC machined shock clamp for the 2017-2022 FOX GRIP damper and 2019-2024 GRIP2 damper for fox 32/34/36/38 and 40 models. . The clamp fits the body ,and... MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 Up for auction is a 4 piece tool set made to service/rebuild the Fox transfer SL and the Raceface Turbine SL dropper seat posts. 2 tools fit the 30.9 and 31.6mm only. The other 2 tools fit 30.9, 31.6 and 27.2. Please read the description further. These... MSRP: Now: $103.78 Add to Cart Compare Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Quick view Details sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox MSRP: Now: $17.78 Add to Cart Compare Quick view Details sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-048 MINI 8/10mm Bike Fork-Shock Shaft Clamp/Vise block-Suspension Rod Holder For Fox This tool is for a 6061 aluminum CNC machined wrench for 34mm stanchion DVO forks. This is a 2-sided wrench used to remove the caps at the bottom of the sanctions. One end has the thinner longer notches and the other has the smaller wider notches. These... MSRP: Now: $22.78 Add to Cart Compare Quick view sku: G080-022 Isostrut Tool for Shock Negative Plate - Trek Service/Rebuild, for FOX ISO Strut This tool is CNC machined to a tight tolerance using 6061 aluminum purchased. This fits the FOX isostrut found on trek bikes 2020-2023. This tool is used to remove the isostruts negative plate. This is needed for a rebuild or shock service. Only the... MSRP: Now: $11.78 Add to Cart Compare Quick view sku: G080-017 2025 Pinned Socket for Damper Cartridge for FOX GRIP SL¨CFor Servicing/Rebuilding The pinned socket is used on the grip SL only. It features hardened steel pins and a 3/8" drive. MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set This auction is a 3 piece set for the trek fox isostrut 2020-2023.1st we have a Trunnion adaptor for the trek FOX isostut 2020-2023 . This clamps around the isostrut and holds the tabs so you can use it in a vise or some a hand dyno under preasure. This... MSRP: Now: $141.78 Add to Cart Compare Quick view sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 This auction is for a 3 piece tool kit for servicing the 2025 fox grip SL damper. These are all the specialty tools you need beyond what you needed for the grip2. All are CNC machined from billet 6061 aluminum to a precision tolerance.The clamp only... MSRP: Now: $65.78 Add to Cart Compare SALE Quick view sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 This auction is for a 5 piece tool kit for the fox 36/38/40 with Grip/Grip2 damper.The kit includes a CNC machined shock clamp for the 2017-2022 FOX GRIP damper and 2019-2024 GRIP2 damper for fox 32/34/36/38 and 40 models. . The clamp fits the body ,and... MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 Up for auction is a 4 piece tool set made to service/rebuild the Fox transfer SL and the Raceface Turbine SL dropper seat posts. 2 tools fit the 30.9 and 31.6mm only. The other 2 tools fit 30.9, 31.6 and 27.2. Please read the description further. These... MSRP: Now: $103.78 Add to Cart Compare Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Quick view Details sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox MSRP: Now: $17.78 Add to Cart Compare Quick view Details sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-048 MINI 8/10mm Bike Fork-Shock Shaft Clamp/Vise block-Suspension Rod Holder For Fox This tool is for a 6061 aluminum CNC machined wrench for 34mm stanchion DVO forks. This is a 2-sided wrench used to remove the caps at the bottom of the sanctions. One end has the thinner longer notches and the other has the smaller wider notches. These... MSRP: Now: $22.78 Add to Cart Compare Quick view sku: G080-022 Isostrut Tool for Shock Negative Plate - Trek Service/Rebuild, for FOX ISO Strut This tool is CNC machined to a tight tolerance using 6061 aluminum purchased. This fits the FOX isostrut found on trek bikes 2020-2023. This tool is used to remove the isostruts negative plate. This is needed for a rebuild or shock service. Only the... MSRP: Now: $11.78 Add to Cart Compare Quick view sku: G080-017 2025 Pinned Socket for Damper Cartridge for FOX GRIP SL¨CFor Servicing/Rebuilding The pinned socket is used on the grip SL only. It features hardened steel pins and a 3/8" drive. MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set This auction is a 3 piece set for the trek fox isostrut 2020-2023.1st we have a Trunnion adaptor for the trek FOX isostut 2020-2023 . This clamps around the isostrut and holds the tabs so you can use it in a vise or some a hand dyno under preasure. This... MSRP: Now: $141.78 Add to Cart Compare Quick view sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 This auction is for a 3 piece tool kit for servicing the 2025 fox grip SL damper. These are all the specialty tools you need beyond what you needed for the grip2. All are CNC machined from billet 6061 aluminum to a precision tolerance.The clamp only... MSRP: Now: $65.78 Add to Cart Compare SALE Quick view sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 This auction is for a 5 piece tool kit for the fox 36/38/40 with Grip/Grip2 damper.The kit includes a CNC machined shock clamp for the 2017-2022 FOX GRIP damper and 2019-2024 GRIP2 damper for fox 32/34/36/38 and 40 models. . The clamp fits the body ,and... MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 Up for auction is a 4 piece tool set made to service/rebuild the Fox transfer SL and the Raceface Turbine SL dropper seat posts. 2 tools fit the 30.9 and 31.6mm only. The other 2 tools fit 30.9, 31.6 and 27.2. Please read the description further. These... MSRP: Now: $103.78 Add to Cart Compare Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Quick view Details sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service MSRP: Now: $14.78 Add to Cart Compare Quick view Details sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-048 MINI 8/10mm Bike Fork-Shock Shaft Clamp/Vise block-Suspension Rod Holder For Fox This tool is for a 6061 aluminum CNC machined wrench for 34mm stanchion DVO forks. This is a 2-sided wrench used to remove the caps at the bottom of the sanctions. One end has the thinner longer notches and the other has the smaller wider notches. These... MSRP: Now: $22.78 Add to Cart Compare Quick view sku: G080-022 Isostrut Tool for Shock Negative Plate - Trek Service/Rebuild, for FOX ISO Strut This tool is CNC machined to a tight tolerance using 6061 aluminum purchased. This fits the FOX isostrut found on trek bikes 2020-2023. This tool is used to remove the isostruts negative plate. This is needed for a rebuild or shock service. Only the... MSRP: Now: $11.78 Add to Cart Compare Quick view sku: G080-017 2025 Pinned Socket for Damper Cartridge for FOX GRIP SL¨CFor Servicing/Rebuilding The pinned socket is used on the grip SL only. It features hardened steel pins and a 3/8" drive. MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set This auction is a 3 piece set for the trek fox isostrut 2020-2023.1st we have a Trunnion adaptor for the trek FOX isostut 2020-2023 . This clamps around the isostrut and holds the tabs so you can use it in a vise or some a hand dyno under preasure. This... MSRP: Now: $141.78 Add to Cart Compare Quick view sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 This auction is for a 3 piece tool kit for servicing the 2025 fox grip SL damper. These are all the specialty tools you need beyond what you needed for the grip2. All are CNC machined from billet 6061 aluminum to a precision tolerance.The clamp only... MSRP: Now: $65.78 Add to Cart Compare SALE Quick view sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 This auction is for a 5 piece tool kit for the fox 36/38/40 with Grip/Grip2 damper.The kit includes a CNC machined shock clamp for the 2017-2022 FOX GRIP damper and 2019-2024 GRIP2 damper for fox 32/34/36/38 and 40 models. . The clamp fits the body ,and... MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 Up for auction is a 4 piece tool set made to service/rebuild the Fox transfer SL and the Raceface Turbine SL dropper seat posts. 2 tools fit the 30.9 and 31.6mm only. The other 2 tools fit 30.9, 31.6 and 27.2. Please read the description further. These... MSRP: Now: $103.78 Add to Cart Compare Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Quick view Details sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-048 MINI 8/10mm Bike Fork-Shock Shaft Clamp/Vise block-Suspension Rod Holder For Fox This tool is for a 6061 aluminum CNC machined wrench for 34mm stanchion DVO forks. This is a 2-sided wrench used to remove the caps at the bottom of the sanctions. One end has the thinner longer notches and the other has the smaller wider notches. These... MSRP: Now: $22.78 Add to Cart Compare Quick view sku: G080-022 Isostrut Tool for Shock Negative Plate - Trek Service/Rebuild, for FOX ISO Strut This tool is CNC machined to a tight tolerance using 6061 aluminum purchased. This fits the FOX isostrut found on trek bikes 2020-2023. This tool is used to remove the isostruts negative plate. This is needed for a rebuild or shock service. Only the... MSRP: Now: $11.78 Add to Cart Compare Quick view sku: G080-017 2025 Pinned Socket for Damper Cartridge for FOX GRIP SL¨CFor Servicing/Rebuilding The pinned socket is used on the grip SL only. It features hardened steel pins and a 3/8" drive. MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set This auction is a 3 piece set for the trek fox isostrut 2020-2023.1st we have a Trunnion adaptor for the trek FOX isostut 2020-2023 . This clamps around the isostrut and holds the tabs so you can use it in a vise or some a hand dyno under preasure. This... MSRP: Now: $141.78 Add to Cart Compare Quick view sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 This auction is for a 3 piece tool kit for servicing the 2025 fox grip SL damper. These are all the specialty tools you need beyond what you needed for the grip2. All are CNC machined from billet 6061 aluminum to a precision tolerance.The clamp only... MSRP: Now: $65.78 Add to Cart Compare SALE Quick view sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 This auction is for a 5 piece tool kit for the fox 36/38/40 with Grip/Grip2 damper.The kit includes a CNC machined shock clamp for the 2017-2022 FOX GRIP damper and 2019-2024 GRIP2 damper for fox 32/34/36/38 and 40 models. . The clamp fits the body ,and... MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 Up for auction is a 4 piece tool set made to service/rebuild the Fox transfer SL and the Raceface Turbine SL dropper seat posts. 2 tools fit the 30.9 and 31.6mm only. The other 2 tools fit 30.9, 31.6 and 27.2. Please read the description further. These... MSRP: Now: $103.78 Add to Cart Compare Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Quick view sku: G080-048 MINI 8/10mm Bike Fork-Shock Shaft Clamp/Vise block-Suspension Rod Holder For Fox This tool is for a 6061 aluminum CNC machined wrench for 34mm stanchion DVO forks. This is a 2-sided wrench used to remove the caps at the bottom of the sanctions. One end has the thinner longer notches and the other has the smaller wider notches. These... MSRP: Now: $22.78 Add to Cart Compare Quick view sku: G080-022 Isostrut Tool for Shock Negative Plate - Trek Service/Rebuild, for FOX ISO Strut This tool is CNC machined to a tight tolerance using 6061 aluminum purchased. This fits the FOX isostrut found on trek bikes 2020-2023. This tool is used to remove the isostruts negative plate. This is needed for a rebuild or shock service. Only the... MSRP: Now: $11.78 Add to Cart Compare Quick view sku: G080-017 2025 Pinned Socket for Damper Cartridge for FOX GRIP SL¨CFor Servicing/Rebuilding The pinned socket is used on the grip SL only. It features hardened steel pins and a 3/8" drive. MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set This auction is a 3 piece set for the trek fox isostrut 2020-2023.1st we have a Trunnion adaptor for the trek FOX isostut 2020-2023 . This clamps around the isostrut and holds the tabs so you can use it in a vise or some a hand dyno under preasure. This... MSRP: Now: $141.78 Add to Cart Compare Quick view sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 This auction is for a 3 piece tool kit for servicing the 2025 fox grip SL damper. These are all the specialty tools you need beyond what you needed for the grip2. All are CNC machined from billet 6061 aluminum to a precision tolerance.The clamp only... MSRP: Now: $65.78 Add to Cart Compare SALE Quick view sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 This auction is for a 5 piece tool kit for the fox 36/38/40 with Grip/Grip2 damper.The kit includes a CNC machined shock clamp for the 2017-2022 FOX GRIP damper and 2019-2024 GRIP2 damper for fox 32/34/36/38 and 40 models. . The clamp fits the body ,and... MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 Up for auction is a 4 piece tool set made to service/rebuild the Fox transfer SL and the Raceface Turbine SL dropper seat posts. 2 tools fit the 30.9 and 31.6mm only. The other 2 tools fit 30.9, 31.6 and 27.2. Please read the description further. These... MSRP: Now: $103.78 Add to Cart Compare Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Quick view sku: G080-022 Isostrut Tool for Shock Negative Plate - Trek Service/Rebuild, for FOX ISO Strut This tool is CNC machined to a tight tolerance using 6061 aluminum purchased. This fits the FOX isostrut found on trek bikes 2020-2023. This tool is used to remove the isostruts negative plate. This is needed for a rebuild or shock service. Only the... MSRP: Now: $11.78 Add to Cart Compare Quick view sku: G080-017 2025 Pinned Socket for Damper Cartridge for FOX GRIP SL¨CFor Servicing/Rebuilding The pinned socket is used on the grip SL only. It features hardened steel pins and a 3/8" drive. MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set This auction is a 3 piece set for the trek fox isostrut 2020-2023.1st we have a Trunnion adaptor for the trek FOX isostut 2020-2023 . This clamps around the isostrut and holds the tabs so you can use it in a vise or some a hand dyno under preasure. This... MSRP: Now: $141.78 Add to Cart Compare Quick view sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 This auction is for a 3 piece tool kit for servicing the 2025 fox grip SL damper. These are all the specialty tools you need beyond what you needed for the grip2. All are CNC machined from billet 6061 aluminum to a precision tolerance.The clamp only... MSRP: Now: $65.78 Add to Cart Compare SALE Quick view sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 This auction is for a 5 piece tool kit for the fox 36/38/40 with Grip/Grip2 damper.The kit includes a CNC machined shock clamp for the 2017-2022 FOX GRIP damper and 2019-2024 GRIP2 damper for fox 32/34/36/38 and 40 models. . The clamp fits the body ,and... MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 Up for auction is a 4 piece tool set made to service/rebuild the Fox transfer SL and the Raceface Turbine SL dropper seat posts. 2 tools fit the 30.9 and 31.6mm only. The other 2 tools fit 30.9, 31.6 and 27.2. Please read the description further. These... MSRP: Now: $103.78 Add to Cart Compare Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Quick view sku: G080-017 2025 Pinned Socket for Damper Cartridge for FOX GRIP SL¨CFor Servicing/Rebuilding The pinned socket is used on the grip SL only. It features hardened steel pins and a 3/8" drive. MSRP: Now: $10.78 Add to Cart Compare Quick view sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set This auction is a 3 piece set for the trek fox isostrut 2020-2023.1st we have a Trunnion adaptor for the trek FOX isostut 2020-2023 . This clamps around the isostrut and holds the tabs so you can use it in a vise or some a hand dyno under preasure. This... MSRP: Now: $141.78 Add to Cart Compare Quick view sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 This auction is for a 3 piece tool kit for servicing the 2025 fox grip SL damper. These are all the specialty tools you need beyond what you needed for the grip2. All are CNC machined from billet 6061 aluminum to a precision tolerance.The clamp only... MSRP: Now: $65.78 Add to Cart Compare SALE Quick view sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 This auction is for a 5 piece tool kit for the fox 36/38/40 with Grip/Grip2 damper.The kit includes a CNC machined shock clamp for the 2017-2022 FOX GRIP damper and 2019-2024 GRIP2 damper for fox 32/34/36/38 and 40 models. . The clamp fits the body ,and... MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 Up for auction is a 4 piece tool set made to service/rebuild the Fox transfer SL and the Raceface Turbine SL dropper seat posts. 2 tools fit the 30.9 and 31.6mm only. The other 2 tools fit 30.9, 31.6 and 27.2. Please read the description further. These... MSRP: Now: $103.78 Add to Cart Compare Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Quick view sku: G080-020-Kit Tool kit- clone of Fox Trek Isostrut #803-01-436 Iso Strut service/rebuild set This auction is a 3 piece set for the trek fox isostrut 2020-2023.1st we have a Trunnion adaptor for the trek FOX isostut 2020-2023 . This clamps around the isostrut and holds the tabs so you can use it in a vise or some a hand dyno under preasure. This... MSRP: Now: $141.78 Add to Cart Compare Quick view sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 This auction is for a 3 piece tool kit for servicing the 2025 fox grip SL damper. These are all the specialty tools you need beyond what you needed for the grip2. All are CNC machined from billet 6061 aluminum to a precision tolerance.The clamp only... MSRP: Now: $65.78 Add to Cart Compare SALE Quick view sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 This auction is for a 5 piece tool kit for the fox 36/38/40 with Grip/Grip2 damper.The kit includes a CNC machined shock clamp for the 2017-2022 FOX GRIP damper and 2019-2024 GRIP2 damper for fox 32/34/36/38 and 40 models. . The clamp fits the body ,and... MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 Up for auction is a 4 piece tool set made to service/rebuild the Fox transfer SL and the Raceface Turbine SL dropper seat posts. 2 tools fit the 30.9 and 31.6mm only. The other 2 tools fit 30.9, 31.6 and 27.2. Please read the description further. These... MSRP: Now: $103.78 Add to Cart Compare Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Quick view sku: G080-015-Kit Tool Kit for Damper Cartridge FOX GRIP SL -For servicing/rebuilding Grip SL 2025 This auction is for a 3 piece tool kit for servicing the 2025 fox grip SL damper. These are all the specialty tools you need beyond what you needed for the grip2. All are CNC machined from billet 6061 aluminum to a precision tolerance.The clamp only... MSRP: Now: $65.78 Add to Cart Compare SALE Quick view sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 This auction is for a 5 piece tool kit for the fox 36/38/40 with Grip/Grip2 damper.The kit includes a CNC machined shock clamp for the 2017-2022 FOX GRIP damper and 2019-2024 GRIP2 damper for fox 32/34/36/38 and 40 models. . The clamp fits the body ,and... MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare Quick view sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 Up for auction is a 4 piece tool set made to service/rebuild the Fox transfer SL and the Raceface Turbine SL dropper seat posts. 2 tools fit the 30.9 and 31.6mm only. The other 2 tools fit 30.9, 31.6 and 27.2. Please read the description further. These... MSRP: Now: $103.78 Add to Cart Compare Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
SALE Quick view sku: G080-005-Kit Service tool kit for FOX GRIP Fork-fits 36, 38, & 40 - For Rebuild/seals GRIP2 This auction is for a 5 piece tool kit for the fox 36/38/40 with Grip/Grip2 damper.The kit includes a CNC machined shock clamp for the 2017-2022 FOX GRIP damper and 2019-2024 GRIP2 damper for fox 32/34/36/38 and 40 models. . The clamp fits the body ,and... MSRP: Was: $86.78 Now: $81.78 Add to Cart Compare
Quick view sku: G080-011-Kit Raceface Turbine SL Seat Post Service Tool Kit-like 398-00-916,398-00-838 /-894 Up for auction is a 4 piece tool set made to service/rebuild the Fox transfer SL and the Raceface Turbine SL dropper seat posts. 2 tools fit the 30.9 and 31.6mm only. The other 2 tools fit 30.9, 31.6 and 27.2. Please read the description further. These... MSRP: Now: $103.78 Add to Cart Compare Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Quick view sku: G080-011 Transfer SL Top Out Cap Driver T/O Tool for FOX service - Clone of 398-00-916 This auction is for Top out (T/O) cap driver used to service a Fox Transfer SL and the Rockshox Turbine SL. This fits the 27.2, 30.9, and the 31.6 seat posts.This is CNC machined to a tight tolerance from billet 6061 aluminum. This has a machined finish... MSRP: Now: $13.78 Add to Cart Compare Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Quick view sku: G080-021 Isostrut Trunnion Adaptor - Threaded coupler for fox 398-00-842 Dyno iso strut This auction is for Trunnion adaptor for the trek FOX isostut 2020-2023 . This threads into where the shock tube would thread so you can dyno the shock using a extra long trunnion tool before assembling or air pressure. This is made from 6061 aluminum... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK California Prop65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Quick view sku: G080-016 2014-2017 Specialized Brain Shock Tool -Socket for service or Rebuild, for Fox This auction is for socket that fits the brain cartridge on a 2014-2017 specialized fox brain shock.This is CNC machined for a precision fit out of 6061 aluminum. It has a 3/8" square drive hole. The socket is a raw machined finish.Only the tool comes... MSRP: Now: $17.78 Add to Cart Compare Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected × OK
Quick view sku: G080-013 Raceface Turbine SL Seal head Torque Driver- clone of fox # 398-00-894- service This auction is sealhead driver that fits the outside collar on a Fox Transfer SL and the Raceface Turbine SL. This WILL NOT fit non SL models!The socket has a Raw machined finish. It is CNC precision machined out of 6061 -t6 aluminum. It uses a 3/8"... MSRP: Now: $14.78 Add to Cart Compare Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected
Quick view sku: G080-015 GRIP SL & Grip X Damper Cartridge Bullet for FOX servicing/rebuilding 2025 This is for seal bullet for servicing the 2025 fox grip SL damper & grip X damper. This is CNC machined from billet 6061 aluminum to a precision tolerance.The older fox model 8mm bullet will not work on the 2025 forks and this tool will not work with... MSRP: Now: $10.78 Add to Cart Compare Previous 1 2 3 4 5 Next Previous 1 2 3 4 5 Next Compare Selected