FREE fast shipping for USA. International delivery may take longer.Magneto Generator Engine Stator 2K-2 Fit For 125/150/200/250 SX XC XC-W SXS EXC 2005-2007
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
All products shipped are tested.
Condition: Aftermarket 100% Brand New
Type: Generator Stator Coil
Other Specifications :
Number of wires: 5
Number of pins: 5
Number of plugs: 2
Number of fixation holes: 3
Number of poles: 6(+2)
THESE MODELS USE 3 DIFFERENT TYPE OF STATORS.
2K-1 (IGNITION ONLY), 2K-2 (AC ONLY) & 2K-3 (FULL DC).
THIS ONE IS THE 2K-2 (AC ONLY) VERSION.
BEFORE BUYING PLEASE MAKE SURE YOUR BIKE USES THE 2K-2 (AC ONLY) VERSION.
Fit for 125/150/200/250 2k-2 Models
Fit for 125 SX Tyla Rattray 2005
Fit for 150 XC 2010-2014
Fit for 200 XC 2006-2007
Fit for 200 XC-W 2006-2007
Fit for 200 EXC 2005
Fit for 250 SXS 2006
Fit for 250 EXC 2005
Fit for 250 XC 2006-2007
Fit for 250 XC-W 2006-2007
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
1x Generator Stator Coil
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.