FREE fast shipping for USA. International delivery may take longer.
100% Brand new and high quality.
Product Shape/Color: Same as the picture show
Before you purchase, please confirm the type and other item specifics of our products correctly match what you are looking for.
170¡ã CDD Car Auto Rear View CMOS Backup Night VisionCamera Reverse Parking Anti Fog Waterproof
1. Anti fog glass, CMOS imaging sensor
2. Drill Hole Style Car HD Rear View Camera, gives you a full sight of the back of your car when you are driving
3. High definition and up to 170 degrees wide viewing angle
4. Use high quality Chip to make vivid and clear images
5. Compact design, easy to install and operate
6. IP68 waterproof design, shock-proof and anti-jamming functions
7. 8 LED Infrared Night Vision ensures the car driving safety when backup or parking at night
8. Helps to avoid incidents, accidents abrasion and ensure your safety
9. Support NTSC/PAL video system
10. With the high sensitivity, you can get rid of the poor rear vision
11. Applicable to variety of vehicles: car, truck, RV, etc
12. Can connect to any type of monitor with a composite yellow RCA jack
1. Scanning System: 2:1 Interlace
2. Resolution : 520 lines
3. Electronic Shutter: 1/60(NTSC) / 1/50(PAL)~1/1000s
4. Gamma Coefficient: 0.45
5. S/N Ratio: >45.6db
6. Dynamic Range: > 63.5db
7. Image Sensors: PC1030 1/4 Inch Color CMOS
8. Sensor Area: 4.08 x 3.12mm
9. Effective Pixels: 928 x 520 Pixels
10. LED Quantity: 8 IR LED
11. Lens Angle: 170 / 135 degrees
12. Image pipeline feature: Auto exposure, AWB, AGC, Auto ficker detection and cancellation
13. Video System: PAL/NTSC(Automatic throw-over)
14. Minimum Illumination: 0.5Lux(0Lux with IR on)
15. Waterproof Class: IP 68
16. Operation Temperature: -20¡æ~ +75¡æ
17. Storage Temperature: -40¡æ~+85¡æ
18. Video Output: RCA connector, 1.0vp-p, 75Ohm
19. Working Power: DC12V
20. Current Consumption:60mA
21. Video cable length: Approx 6 m/ 236.2 inch
22. Power supply cable length: Approx 1.2m/ 47.2 inch
23. Drill Hole Diameter: Approx 18.5mm/0.73 inch
24. Camera Dimension: Approx 25*21*18.5mm/0.98*0.83*0.73 inch
1.Use the hole driller to mount the camera at the back of the car (on the license plate back window or other suitable place)
2.Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative.
3.Connect the video cable of the camera to the extension cord.
4.Connect the extension cable to the car monitor.
5.You will see the images when your car is in reverse shift.
1*8 LED round back up camera
1* hole saw
1* colored box package