AUD
CAD
EUR
GBP
USD
ZAR
Product Description
FREE fast shipping for USA. International delivery may take longer.
Magneto Generator Engine Stator SK-2 Fit For 125/200/250/300/380 SX EXC Six-day MXC 1998-2004 54839004000Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.
Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
Other Specifications :
Number of wires: 5
Number of pins: 5
Number of plugs: 5
Number of fixation holes: 3
Number of poles: 6(+2)
PART NUMBER(S):
50339004100
Fitments:
THESE MODELS USE 3 DIFFERENT TYPE OF STATORS.
2K-1 (IGNITION ONLY), 2K-2 (AC ONLY) & 2K-3 (FULL DC).
THIS ONE IS THE 2K-2 (AC ONLY) VERSION.
BEFORE BUYING PLEASE MAKE SURE YOUR BIKE USES THE 2K-2 (AC ONLY) VERSION.
Fit for 125/200/250/300/380 2K-2 Models
Fit for 125 SX 1998-2004
Fit for 125 EXC 1998-2004
Fit for 125 Six days LE 1997
Fit for 125 EXC Six days 2002-2004
Fit for 125 EGS 6KW 1998-1999
Fit for 125 SXS 2000/2002-2004
Fit for 200 MXC 1998-2003
Fit for 200 EGS 12LT 8KW 1998-1999
Fit for 200 EXC Jackpiner 1997
Fit for 200 EXC SGP 2000
Fit for 200 EXC SGP GS 2002
Fit for 200 EGS SGP 1999
Fit for 200 EXC GS 8kW 2000
Fit for 250 SX 2001-2002/2004
Fit for 250 EXC 1998-2004
Fit for 250 SXS 2001/2004
Fit for 250 EXC Six days 2001-2002/2004
Fit for 300 EXC 2000-2004
Fit for 300 MXC 2000-2004
Fit for 300 EXC Six days 2001/2003
Fit for 380 SX 2000-2002
Fit for 380 MXC 2000-2001
Fit for 380 EXC 2000-2002
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
Package Included:
1x Generator Stator Coil
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
